46 Quart 12V Cooler/Warmer by Wagan Tech
®
3
www.wagan.com
OPERATION
1. Locate power switch and power cord inside hatch at rear of lid.
2. Make sure the unit is off before connecting to a power source. The power
switch should be in the middle position.
3. With vehicle running, plug the power cord into the cigarette lighter socket
in your vehicle or other 12 volt DC power supply (5 amps minimum).
4. Slide the power switch into the position of the desired function.
Mode
Icon
Position
Cooling
Left
Off
Middle
Warming
Right
5. Observe the indicator light next to the mode you have set the unit to. The
red indicator should illuminate for warming and the green indicator should
illuminate for cooling.
6. Place your consumable items inside the storage compartment and close the
lid. Do not overfill the unit so that the lid is not able close firmly. Keep lid
closed during operation and re-close it quickly when adding and removing
items.
7. Before turning your vehicle engine off, switch the unit off and unplug it
from the DC socket. Clean the unit as soon as possible after use. Follow the
cleaning instructions under "Care & Maintenance" before storing away.
