User’s Manual—Please read before using this equipment
© 2015 Wagan Corporation. All Rights Reserved.
Wagan and wagan.com are trademarks used by Wagan Corporation.
5
Replacing the Halogen Bulb
• Unscrew the retaining ring around the lens.
• Remove the lens.
• Pull out the reflective lens cone, enabling access to the bulb.
• Disconnect the spade connector.
• Unclip the spring clip
• Pull out the bulb (IMPORTANT: Do not touch the glass of the bulb, handle
by the base only)
• If necessary, clean glass with methylated spirits and a soft cloth.
Battery Replacement & Removal
• The lead-acid battery in this spotlight has a normal service life of many
years. When the battery does expire, it should be removed from the
spotlight for recycling. Please contact your local solid waste authority for
recycling information.
• To access the battery, unscrew the retaining ring around the lens.
• Underneath is a bracing plate with four corner screws. Remove these
screws.
• Remove battery and switch assembly from flashlight housing.
• Slide back plastic protectors from battery terminals.
• Use the screwdriver to depress the tabs on the battery terminals. The
wires are reattachable.
Specifications
• Dimensions: 7 x 6 x 8.75 in
• Net Weight: 4 lbs.
