background image

 

 

Storm Form and Storm Form DMX User Guide 

Version 1.1 – 2/25/2021 

STORM FORM AND STORM FORM DMX USER GUIDE 

 

 

The Storm Form is a rugged and compact outdoor gobo projector with adjustable zoom and focus. It is 
available with either Warm White or Cool White output. The Storm Form is also available in a DMX 
controllable version. The Storm Form and Storm Form DMX are small and discreet, but engineered to 
deliver lasting performance in permanent outdoor installations. The Storm Form and Storm Form DMX  
are available in black or silver finish. The Storm DMX is configured using our DMX Programmer app, 
which is available free for Apple and Android devices, or using our DarkBox Programmer standalone 
programming device.

 

Features 

o

 

Adjustable zoom and focus 

o

 

16-27° beam angle 

o

 

Accepts 19mm steel or glass gobo (up to 2mm thick) 

o

 

Warm White (90+ CRI) or Cool White LED 

o

 

9 Watt LED 

o

 

Class 2, low-voltage 12-24VDC input (DO NOT HOT PLUG) 

o

 

Rated IP65 for permanent outdoor installation 

o

 

Locking mount 

o

 

Waterproof connector for use with Gantom Pro Cable System 

o

 

Available in black or silver finish  

o

 

DMX controllable version available 

Available Models: 

Item Number 

Item Description 

ST128 

Storm Form - Warm White - Black Anodized Finish 

ST130 

Storm Form - Warm White - Silver Anodized Finish 

ST131 

Storm Form - Cool White - Black Anodized Finish 

ST133 

Storm Form - Cool White - Silver Anodized Finish 

ST163 

Storm Form DMX - Warm White - Black Anodized Finish 

ST165 

Storm Form DMX - Warm White - Silver Anodized Finish 

ST166 

Storm Form DMX - Cool White - Black Anodized Finish 

ST168 

Storm Form DMX - Cool White - Silver Anodized Finish 

Содержание Storm Form















Отзывы: