![background image](http://html.mh-extra.com/html/wagan/2-way-jumpstarter/2-way-jumpstarter_user-manual_867662003.webp)
Portable 2 Way Jumpstarter by Wagan Tech
USER’S MANUAL — Please read before using this equipment.
________________________________________________________________________________________________________________________________________________________________
www.wagan.com
© 2004 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
3
-
Use only the provided chargers, cables and clamps
Unauthorized parts may damage the unit
-
This product has no consumer serviceable parts
-
This product is not a toy. Keep out of reach of children
-
Keep battery terminals clean. Be careful to keep corrosion
from coming in contact with eyes
-
Do not let the cords of the jump-starter or attached
appliances get wet
-
Do not operate this unit in or around water. Water can
damage the unit
CHARGING AND RECHARGING
WARNING:
-
Do not overcharge this unit. Prior to charging unit, read and
understand all instructions for this unit. Overcharging may
result in damage to the unit
-
This product may arrive partially charged from the
manufacturer. It is recommended to fully charge the unit
immediately after purchase and before using for the first time
-
The charging LED indicator will be illuminated while
charging. When charging is completed, unplug the AC
charger from the AC outlet
-
Do not charge the unit for more than 24 hours continuously
-
Do not charge the unit on a boat, boat ramp, or dock since
the electrical cords and outlets used for charging could
cause severe electrical shock if they get wet
-
It is recommended that the unit be in an upright position
while charging
NOTE:
Make sure both cable clamps (positive and negative) are placed in their
storage holsters when not in use.
CHARGING WITH AC CHARGER:
1. Insert AC charger plug into charger jack of the unit
2. Insert AC charger receptacle plug into AC receptacle
3. Fully charge the unit to the following: Initial and first time charge –
24 hours continuously; Recharge or between use – 20 hours
continuously
4. When charging is complete, unplug the AC charger receptacle plug
then the AC charger from the charging jack on the unit
CHARGING WITH 12-VOLT CHARGER:
1. Insert DC charger plug into charger jack of the unit
2. Insert DC charger accessory plug into vehicle cigarette lighter
socket
3. Fully charge the unit for 6-8 hours continuously, while the engine is
running
4. When charging is completed, unplug the DC charger accessory
plug first and then the DC charger from the charging jack on the
unit
JUMP-STARTING A VEHICLE:
WARNING:
Vehicles equipped with on-board computers may be affected if the engine
battery is jump-started. Read your vehicle owner’s manual before
attempting to start the vehicle to determine if external starting assistance
can be used. Failure to follow these instructions may cause damage or
explosion.