background image

WAFER GSM-KEY REMOTE CONTROL UNIT 

http://www.waferstar.com 

GSM-KEY OPERATING INSTRUCTIONS 

PRODUCT DESCRIPTION 

WAFER GSM-KEY is an electronic board with an on-board GSM modem.The purpose of 

this device is to open an electric gate by means of a GSM phone.It has a door open relay whose 
contact has to be connected in parallel with the button which opens the gate. It has a White List of 
regular user numbers who are enabled to open the phone, up to 200 and also it has up to 150 
number for time zone. When the GSM-KEY receives a call, it will check to see if the calling 
number is in the list. If it is in the list it will reject the call (so there will be no charge -at least with 
today's charging procedures) and click the relay momentarily. 

Also GSM-KEY has two alarm input port for the security detection including the intruder 

detection alarm and gate problem alarm. 

CONNECTOR DESCRIPTION 

 

ADVANTAGES OF WAFER GSM-KEY 

ˇ 

200 Regular User Numbers memory. 

ˇ SHL

50+PHL50+QHL50 ,total 150 Special Numbers memory for time zone. 

ˇ 

5 Alarm Numbers memory. 

ˇ 

Up to 50 logs stored in database. 

ˇ 

No call charges to operate. 

ˇ 

No line rental using ‘Pay as You Go’. 

ˇ 

No key-fobs for children to lose. 

ˇ 

Let visitors and deliveries in remotely. 

ˇ 

Impossible to clone or intercept. 

ˇ 

Caller ID confirmation for security. 

ˇ 

Quick & easy number barring. 

ˇ 

Easy programming in minutes with your phone or PC software. 

1. GSM LED (Left) 

2. MCU LED (Middle) 

3. RELAY LED (Right) 

Содержание AC200















Отзывы: