Waeco PerfectView MC402, Инструкция по установке и эксплуатации

Страница: 25 / 68

EN
MC402 Installing the moniceiver
25
To perform the installation and the electrical connection, proceed as follows:
➤
Disconnect the negative terminal of the battery.
➤
Remove any existing audio system.
➤
Install the 2 DIN installation sleeve (fig. 7 , page 5).
➤
Bend the retaining tabs up, down and out at the sides in order to fix the
housing securely in the centre console (fig.
8 , page 6).
➤
Attach the fastening brackets to the device with the fastening screws pro-
vided (M5 X 6)(fig.
9 , page 6).
➤
Connect the device to the electrical system in accordance with the circuit
diagram (fig.
b , page 8).
➤
Conduct a function test before finally installing the device.
➤
Remove the two screws from the top of the device (fig. 9 1 page 6).
➤
Place the device into the slot and secure it with the fastening screws pro-
vided (fig.
0 1 page 7).
➤ Fit the cover frame (fig.
a
1 page 7).