General safety instructions
PerfectCharge / PerfectPower
22
Electrical cables
z
If cables have to be fed through metal walls or other walls with
sharp edges, use ducts or tubes to prevent damage.
z
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
z
Do not pull on the cables.
z
Fasten the cables securely.
z
Lay the cables so that they cannot be tripped over or damaged.
2.3
Operating the device safely
z
Caution!
Note the following basic safety information when using electrical
devices to protect against:
– Electric shock
– Fire hazards
– Injury
z
Make sure the polarity is correct.
Incorrect polarity can irreparably damage the device.
z
Operate the device only if you are certain that the housing and
the cables are undamaged.
z
Ensure that there is a sufficient cable cross section for the input
and output wires.
z
Make sure the air inlets and outlets of the device are not
covered.
z
Ensure good ventilation.
z
Even after the protective device triggers, parts of the device
remain live.
z
Always disconnect the power supply when working on the
device.
_DC Power Booster.book Seite 22 Mittwoch, 11. April 2007 8:31 08
