MF-05, MF-15, MF-18D
Operation
19
6
Operation
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the the “Cleaning and maintenance”
chapter on page 20).
6.1
Energy saving tips
z
Choose a well ventilated installation location which is protected against
direct sunlight.
z
Allow food to cool down first before placing it in the device.
z
Do not open the cooling device more often than necessary.
z
Do not leave the door open for longer than necessary.
6.2
Using the cooling device
Like every cooling device, your cooler must be properly ventilated
so that any heat created can be drawn off. Otherwise proper func-
tioning cannot be ensured.
➤
Place the refrigerator on a firm base.
Ensure that the ventilation slots are at least 10 cm away from the wall so
that the heat that arises during operation can be drawn off.
➤
Plug the 12 V connection cable (
1
2, page 3) into the DC socket and also
into the cigarette lighter or a 12 V socket ...
or
➤
Plug the 220-240 V connection cable (
1
3, page 3) into the AC voltage
socket and connect it to the 220-240 V AC mains supply.
➤
MF-05, MF-15:
push the switch (
3
3, page 3) on the control panel to
“HOT” or “COLD” to switch the device on.
➤
MF-18D:
press the “HOT” button (heating,
5
5, page 4) or “COLD”
(cooling,
5
2, page 4), to switch on the device.
✓
The refrigerator starts cooling/heating the interior and the appropriate
LED lights up.
Ensure that the objects placed in the refrigerator are suitable for
cooling or heating to the selected temperature.
_mf-kuehlschraenke.book Seite 19 Mittwoch, 6. April 2005 9:37 09
