Waeco ECL-76, Инструкция по установке и эксплуатации

Страница: 104 / 196

Connection ECL-76, ECL-102, ECL-103
EN
104
➤
Mount the ECL-76/ECL-102 charging current distributor and the corresponding relay in
such a way that they remain fixed, dry and well-ventilated, ideally in direct proximity to
the inverter.
➤
Connect the positive terminal of the starter battery to relay connection 30 (Batt. 1) and
the positive terminal of the additional battery to relay connection 87 (Batt. 2).
I
➤
Insert an electrical fuse in direct proximity to the starter battery and an electrical fuse
(value see associate circuit diagram) in direct proximity to the supply battery into the
positive lead.
I
Dometic
FreshLight1600 ECL-103 SinePower MSI1824T 35 mm
2
minimum
Dometic
FreshLight2200 ECL-102 PerfectPower PP2002 25 mm
2
minimum
Dometic
FreshLight2200 ECL-102 SinePower MSI1812T 35 mm
2
minimum
Dometic
FreshLight2200 ECL-103 SinePower MSI1824T 35 mm
2
minimum
Dometic
FreshWell3000 ECL-102 SinePower MSI1812T 35 mm
2
minimum
Dometic
FreshWell3000 ECL-103 SinePower MSI1824T 35 mm
2
minimum
NOTE
Use cables with the correct cable cross section – see circuit diagrams, fig. 1 ,
page 3 to fig. o , page 27.
NOTE
 The fuse in the positive lead from the charging current distributor to the
battery can only be omitted if the lead is very short and will not come into
contact with metal.
 To connect the inverters in the scope of delivery of the DC kits, please refer
to the documentation accompanying the equipment.
Air conditioner
Charging current
distributor
Inverter
Cable cross
section