1. Remove the electronic module
2. Use your voltage meter to check the resistance between the pins. All three pins should read around 2 ohms at 25º.
A
B
C
0844 626 0130
www.dometic-waeco.com
•
Testing the compressor windings
- Repair Guide
Pins
Ω Reading @ 25º
A-B
2
A-C
2
B-C
2
Fixing the bottom lock
- Repair Guide
Customer can complain that there unable to open the fridge door without lifting the door. This can sometimes be due to installation or damaged in transit.
Remove the fridge from the housing and disconnect the power. Locate the bottom door lock.
You can adjust the bottom lock with
the silver screw marked to the left.
If adjusting the screw doesn’t work please loosen
the outer screws and place a thin washer on both
sides between the housing and lock plate.
