16
RPD-175, RPD-215
7.3 Removing and replacing the shelves
1. Remove the shelf locks by inserting
the tip of a fl at bladed screwdriver
into the slot of the locks. Turn the
screwdriver counterclockwise and
then remove the shelf locks from
the wire shelf.
2. Tilt the shelf
to one side
at an angle
while pulling
forward.
3. Reposition the shelf in the desired location. Insert the ends of the wire shelf
on the left-hand side and slide the shelf into the holes on the right-hand
side.
4. Slide the plastic plugs into
the holes of the wall.
5. Snap the shelf locks onto
the wire shelf.
M_101101_RPD_R1.indd 16
M_101101_RPD_R1.indd 16
10/12/10 2:37 PM
10/12/10 2:37 PM
