EN
Setting up and connecting the cooling device
MDC065(K), MDC090(K)
30
Connecting to a battery
The cooling device can be operated with a 12 V or 24 V DC voltage supply.
A
➤
Determine the required cross section of the cable in relation to the cable
length according to fig.
7
, page 5.
Key for fig.
7
, page 5
A
Before starting up the device for the first time, check whether the
operating voltage and the battery voltage correspond (see type plate).
➤
Connect the cooling device
– As directly as possible to the pole of the battery or
– To a plug socket which is fused with at least 15 A (at 12 V) or 7.5 A
(at 24 V).
A
NOTICE!
To avoid voltage loss and therefore a drop in performance,
the cable should be kept as short as possible and should not
be interrupted if this is possible.
For this reason avoid additional switches, plugs or power strips.
Co-ordinate axis
Meaning
Unit
l
Cable length
m
∅
Cable cross section
mm²
NOTICE!
Make sure that the polarity is correct.
NOTICE!
Disconnect the cooling device and other power consuming devic-
es from the battery before connecting the battery to a quick charg-
ing device.
Overvoltage can damage the electronics of the device.
