COOLMATIC MDC Series
Operation
31
➤
Switch the cooling device on by turning the knob (fig.
1
A, page 3) to the
right.
After switching on, the cooling device requires approx. 60 s until
the compressor starts up.
Caution!
Ensure that the objects placed in the cooling device are suitable
for cooling to the selected temperature.
Setting the temperature
You can set the temperature to any level using the knob. The built-in
temperature control regulates the temperature as follows:
– min. (left limit) = warmest setting
– max. (right limit) = coldest setting
The cooling capacity can be influenced by:
z
The ambient temperature
z
The amount of food to be conserved
z
The frequency with which the door is opened
Conserving foodstuffs
You can conserve foodstuffs in the cooling device compartment. The time for
which the food can be conserved in this way is usually stated on the package.
Caution!
Do not conserve
warm
food in the cooling device compartment.
Do not place glass containers with liquid in the freezer
compartment.
Food which can easily absorb tastes and odours and liquids and
products with a high alcohol content should be conserved in air-
tight containers.
The cooling device compartment is divided in different zones with different
temperatures:
z
The colder zones are immediately over the base, near the back wall.
z
Observe the temperature information and best before date on the food
packaging.
➤
Observe the following when using the device:
z
Do not re-freeze products which are defrosting or have been defrosted,
consume them as soon as possible.
MDC.book Seite 31 Montag, 27. September 2010 4:01 16
