Waeco CoolMatic CRX50, Инструкция по установке и эксплуатации

Страница: 50 / 380

EN
Using the refrigerator CoolMatic
50
Defrosting the refrigerator
The appliance has two options to remove the condensation resulting from
operation:

pass it directly outside:
Remove the drain plug (fig.
8 1, page 6).
Connect a hose with an inside diameter of 10 mm to the outlet port
(fig.
8 2, page 6).
 Wiping it up occasionally:
Wipe the condensate up when necessary.
Defrosting the freezer
A
This is how to defrost the refrigerator:
➤ Empty the contents.
➤
If necessary, put them in another cooling device to keep them chilled.
➤
Press the on/off button until the refrigerator switches off.
➤
Close the door properly.
8.3 Releasing the lock
A
The refrigerator has a locking mechanism (fig. f 1, page 9) which is also
used to protect it during transport. The following settings are possible:
 Lock (turn wheel clockwise to the end stop): the door is locked and
secured.
To open the door, lift the handle up and open it.
 Vent (turn wheel anti-clockwise to the end stop): The door is slightly open,
but fixed in position.
Use this position if you are not going to use the unit for a long time.
NOTICE!
Never use mechanical tools to remove ice or to loosen objects
stuck to the device. The only exceptions are devices approved for
the purpose by the manufacturer.
NOTICE!
Only adjust the locking mechanism when the door is open. If you
use it with the door closed, you will damage the device.