Waeco COOLFREEZE CDF 11, Руководство по эксплуатации

Страница: 30 / 252

EN
Operation CoolFreeze CDF11
30
✓ The display (fig.
2
5, page 3) switches on and shows the current cooling
temperature.
✓
The cooler starts cooling the interior.
6.7 Setting the temperature
➤
Press the “SET” button (fig. 2 4, page 3) once.
➤
Use the “+” (fig. 2 6, page 3) and “–” (fig. 2 7, page 3) buttons to select
the cooling temperature.
✓
The cooling temperature appears in the display for a few seconds. The
display flashes several times and then the current temperature is dis-
played again.
6.8 Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit.
This is how to do it:
➤
Switch on the cooler.
➤
Press the “SET” button (fig. 2 4, page 3) twice.
➤
Use the “+” (fig. 2 6, page 3) and “–” (fig. 2 7, page 3) buttons to select
Celsius or Fahrenheit.
✓
The selected temperature units then appear in the display for a few sec-
onds. The display flashes several times before it returns to the current
temperature.