Waeco ASC 6300 G LE, Руководство по эксплуатации

Страница: 37 / 254

EN
Problem Possible cause Suggested remedy
refrigerant in the internal container to
complete the process.
The display shows
Not enough UV.
Add!
This message appears during the fill-
ing process if there is not enough UV
additive in the container to finish the
process.
Fill the UV additive container.
The display shows
Not enough oil.
Add!
Message that appears during the filling
process if there is not enough fresh oil
in the container to finish the process.
Top up the fresh oil container with a
suitable oil type.
The display shows
Max. filling
time exceeded! Carry on?
Message that appears during the filling
process if the set amount of refrigerant
cannot be filled.
Check that A/C service unit's connec-
tions are not blocked.
The display shows
External tank
empty or closed valve. Check!
Message that appears at the start or
during the filling of the internal refriger-
ant container if the set refrigerant quan-
tity cannot be attained.
Check if the external refrigerant con-
tainer still contains enough refrigerant
or if the valves of the external refriger-
ant container are open.
The display shows
Change the
equipment drier filter! Go on?
This message appears when you
switch on the A/C service unit.
Change the internal filter as soon as
possible ( Changing the dryer filter on
page 31). To skip this, press EN-
TER for 3 seconds.
The display shows
Change the vacu-
um pump oil! Go on?
This message appears when you
switch on the A/C service unit.
Change the vacuum pump oil as soon
as possible ( Changing the vacuum
pump oil on page 33). To skip this,
press ENTER for 3 seconds.
The display shows
Printer not in
line! Carry on?
Message indicates a printer fault. Check if there is paper in the print-
er.
Check if the printer is switched on
(yellow LED must be lit constantly).
Check that the cover is closed prop-
erly.
The display shows
Error 01
Refrigerant was added before draining
was completed.
Repeat the draining procedure; do not
interrupt it this time.
The display shows
Error 02
The air conditioning system is leaking.
There is still refrigerant in the air condi-
tioning system.
Fix the leak.
The display shows
Error 03
No data is coming from the refrigerant
scale.
Check the scale.
The display shows
Error 04
It is not possible to lower the pressure
when flushing takes place.
Check air conditioner and connec-
tions for leaks, constrictions and ice
build-up.
Check pressure transducer calibra-
tion.
The display shows
Error 09
Low pressure connector not connected
to the flush container during flushing.
Connect low pressure hose to the flush
box and open valve.
The display shows
Error 10
It was not possible to reduce the pres-
sure sufficiently during the Software
test.
Residual pressure on the pressure
gauges?
Check pressure transducer calibra-
tion.
Check internal bottle pressure.
Check the compressor and the cor-
responding solenoid valves.
The display shows
Error 12
It was not possible to remove any re-
frigerant from the internal vessel during
the Software test.
Check pressure transducer calibra-
tion.
Check if the valve on the internal
vessel is open.
Check the RE valve.
37