Waeco ASC 6300 G LE, Руководство по эксплуатации

Страница: 30 / 254

EN
1.
In the basic menu use the cursor keys or to select
Other selections
.
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3.
Use the cursor keys or to select
Reset scales
.
Int. vessel filling
Flushing
Reset scales.
Service.
You are then prompted to remove the containers from the scale:
Remove the 3 Oil/UV
glasses from scales.
ENTER-OK STOP-EXIT
4. To check the zero point of the scales for oil and UV additive, open the cover (13) on the left side and take the
containers off the catches:
• Container for fresh oil (10)
• Container for UV additive (11)
• Drained oil receptacle (12)
5.
When the scales are relieved, press
ENTER
to confirm. The prompt to remove the containers from the scale
will flash. Once you have set the zero point, the selection menu for the scales appears again.
6. Return the containers to the operating positions: Reattach the containers for oil (10) and (12) and for the UV
additive (11) to the snap locks and close the cover (13).
7. Press STOP twice to access the standby menu.
30