EN
Operation
BMW5500G RPA
104
1. First fit the service hoses for the AirConServiceCenter to the vehicle
air conditioning system, and open the service couplings.
2. Press the cursor key
or
to access the basic menu.
3. In the basic menu, use the cursor keys
or
to select
“Short
selection”
:
4. Press
ENTER
to confirm.
5. Use the keypad (
8
) and the cursor keys to enter the vehicle data.
6. Press
ENTER
to confirm.
7. Enter the refrigerant filling quantity. Use the value shown on the
filling quantities sticker in the vehicle and enter it using the keypad
(
8
) and the cursor keys and press
ENTER
.
The unit shows the following message:
8. Decide whether a UV medium should be added when filling up or
not.
9. Use the cursor keys
or
to select whether the air conditioning
system has two°connections (high pressure and low pressure) or
only one connection (high pressure or low pressure).
Press
ENTER
to confirm.
Short selection
Free selection
Other selections
ENTER-OK
CAR DATA
PLATE NR:
Filling value
Yes
by sticker
No
in the engine bay?
Refrigerant
g.
ENTER-OK STOP-EXIT
WARNING !
Yes
UV-Tracer injection
No
phase?
HP/LP
PORT
HP
PORT
LP
PORT
ENTER-OK STOP-EXIT
WaecoBMW5500GRPA_OPM_4445102321_EMEA(de-en-es-fr-ru)_202x-xx-xx.book Seite 104 Freitag, 6. November 2020 9:04 21
