on the well. The connector will not move left or right if the tabs are seated
correctly. Once those tabs are seated, push down slowly on the rear of the
adapter until the back of the adapter clips on the back edge of the iTransport.
Do not force the adapter down. Forcing the connector could damage the 30-pin
connector on the iTransport. Damage due to incorrect installation of the adapter
cable is not covered by the Wadia warranty.
For further instructions, please visit www.wadia.com and view the
adapter installation video in the 171iTransport section.
◆
Installing iPod Dock Inserts
The Wadia 171iTransport comes with several dock inserts that will allow it to
accommodate the compatible iPod models. First, you will want to determine
which insert fits your iPod model. If there is already a dock insert in the Wadia
171iTransport, you will want to remove it. This is accomplished by applying slight
pressure with your thumbs to the back of the insert while pushing up to release
the dock insert. To install the new insert, make sure that the two (2) small slits in
the inside of the insert are facing the front of the Wadia 171iTransport. Place the
dock insert over the multi-pin metal connector and carefully click into place.
9
