Laundryprint
Operators Manual
Label Retainer.
This item is fitted to stop smaller size labels getting pulled back into the printer.
To fit the label retainer strip….
•
Ensure that the area you are sticking the retainer is clean & free from dust etc.
•
Peel the self adhesive backing off
•
Align the lower edge of the self adhesive tape to the upper edge of the cutter tape exit. (See picture).
•
The clear plastic flap should bend outward to the front of the printer / Cutter (see picture).
9
Lower edge of self adhesive tape
aligned to upper cutter exit.
Label exit direction
Retainer Flap bends
outward in the same
direction as the label is
exiting the printer