Laundryprint
Operators Manual
Adding a new ribbon
If the ribbon runs out in the middle of a print job, the indicator lights
RED
and the printer waits for you to add a new ribbon.
Keep the power on as you change the ribbon.
Open the top cover, and then cut the used ribbon so that you can remove the core.
Load the new ribbon roll. (see ribbon installation tips)
Close the printer cover.
Press the Feed button to restart the printer.
Replacing a Partially used transfer ribbon.
Cut the ribbon from the take –up roll.
Remove the take-up roll and discard the used ribbon.
Remove the supply roll and tape the end of any fresh ribbon to prevent it from unwrapping,
When reinstalling a partially used supply roll, tape the cut end onto the empty take up roll.
Problem Solving
8