Wacom DTK-2400, Руководство пользователя

Страница: 79 / 113

Contents Index
Contents
79
Index
79
The pen selects everything or
will not stop drawing. Open the Wacom Tablet control panel and go to the P
EN
tab. Move the
T
IP
F
EEL
slider toward F
IRM
, or select D
ETAILS
... and increase the C
LICK
T
HRESHOLD
setting. If this does not help, see testing controls and input
tools .
Double-clicking is difficult. Be sure you are quickly tapping the display screen twice in the same
place. Wacom recommends using the side switch to double-click.
Open the Wacom Tablet control panel and go to the P
EN
tab.
Try increasing the T
IP
D
OUBLE
C
LICK
D
ISTANCE
or using a lighter T
IP
F
EEL
.
Set an ExpressKey to D
OUBLE
C
LICK
and use it to issue double-clicks.
Windows: Try setting your system to launch programs with a single
click. See
clicking .
The eraser selects everything
or will not stop erasing. Open the Wacom Tablet control panel and go to the E
RASER
tab.
Move the E
RASER
F
EEL
slider toward F
IRM
, or select D
ETAILS
... and
increase the C
LICK
T
HRESHOLD
setting. If this does not help, see testing
controls and input tools .
You notice a delay at the
beginning of pen or inking
strokes. Open the Wacom Tablet control panel and go to the P
EN
tab.
Try decreasing the T
IP
D
OUBLE
C
LICK
D
ISTANCE
. If that does not work,
move the T
IP
D
OUBLE
C
LICK
D
ISTANCE
slider to the O
FF
position in order
to turn off double-click assist.
You have to press hard with
the pen when clicking,
drawing, or writing. Open the Wacom Tablet control panel and go to the P
EN
tab.
Move the T
IP
F
EEL
slider toward S
OFT
, or select D
ETAILS
... and decrease
the S
ENSITIVITY
and C
LICK
T
HRESHOLD
settings.
The pen tip does not function. Be sure you are using only the pen that came with your product,
or a Wacom accessory pen specified for use with the Cintiq 24HD.
Other pens may not function properly on the pen display.
Check the control panel P
EN
tab and verify that a C
LICK
function is
assigned to the pen tip.
Make sure the status LED lights blue when the tip is pressed. If the
LED does not light, verify that the USB cable is plugged into an active
port on your computer or on a USB hub.
If the LED still does not light, you may have defective hardware (see
troubleshooting ).
The pen tip and screen cursor
do not properly line up. Open the Wacom Tablet control panel and select the C
ALIBRATE
tab.
Continue with calibrating the pen display .
Changing the function settings
for an input tool has no effect. Make sure you change the settings for the tool and application that you
are using. See
application-specific settings and working with multiple
tools .