Wacom DTK-2100 - INSTALLATION AND Скачать руководство пользователя | Manualshive

Страница: 40 / 92

background image

Customizing
Page 38

ADJUSTING THE DISPLAY

FACTORY PRESETS, AUTO-SYNC, AND USER SETTINGS

Factory presets: For optimal display quality, set your video card to the maximum (native) resolution
that can be used with Cintiq. See the “Product specifications” on page 68 for details.

Auto-sync: Cintiq automatically synchronizes to the incoming signal. The auto-sync function sets the
horizontal and vertical screen position, as well as pitch and phase. Auto-sync will function between
the supported horizontal and vertical frequency ranges. See the “Product specifications” on page 68
for details.

If Cintiq does not automatically synchronize with the incoming signal, you can use the OSD A

UTO

A

DJUST

option to initiate display synchronization. Further screen display adjustments can be manually

made using the On Screen Display (OSD) controls.

Color calibration: Changing the color, color temperature, contrast, brightness, or backlight from their
default settings will invalidate the ICC color profile that was included on the Installation CD.

ON SCREEN DISPLAY (OSD) SETTINGS

The OSD function enables you to optimize a variety of display settings at the touch of a button.
Make adjustments using the OSD controls located on the back of the unit. Reach over the top of the
display to locate the buttons.

Note: After changing a setting, the OSD menu will automatically close after a few moments of inactivity. You can

also press the M

ENU

button to close the OSD menu. All settings are automatically saved when the OSD

menu closes and will be used the next time the unit receives a similar video signal. This is applicable to all
display modes. If you make changes to the display appearance and cannot return to the original settings,
use the R

ESET

option to return the pen display to its original factory defaults.

Digital/Analog
(DVI/VGA) switch

1. M

ENU

button

Press to open or exit
the OSD menu.

2. Selection buttons
Use these buttons to select and highlight an option.
Then press the E

NTER

button. The current settings and

adjustment sub-menu for that option will appear.
Some settings may not be available when in DVI mode.
Use the buttons to select and adjust the option
settings. (Press the up button to increase a selected
item value. Press the down button to decrease it.)
After making changes, press the E

NTER

button to save.

See the following pages for a detailed description of
menu options.

E

NTER

button

Activates the
selected OSD menu
option.

«
...
38
39
40
41
42
...
»

Содержание DTK-2100 - INSTALLATION AND





























































































Отзывы:

Нет отзывов

Похожие инструкции для DTK-2100 - INSTALLATION AND

TOUGHPAD JT-B1 Series

Бренд: Panasonic Страницы: 2

Toughbook FZ-G1

Бренд: Panasonic Страницы: 52

Toughbook FZ-A1

Бренд: Panasonic Страницы: 40

Бренд: Qomo Страницы: 51

Бренд: Pixus Страницы: 88

Бренд: ADS-tec Страницы: 69

Kyros MID1045 Series

Бренд: Coby Страницы: 41

Бренд: Wacom Страницы: 2

Бренд: Laser Страницы: 13

HANNSpad SN12TP1

Бренд: HANNspree Страницы: 17

LG-V700 Pad 10.1

Бренд: LG Страницы: 106

FuturePAD Lumify

Бренд: Philips Страницы: 7

Бренд: Philips Страницы: 34

Бренд: Philips Страницы: 34

Бренд: Philips Страницы: 38

Бренд: Philips Страницы: 34

Бренд: Philips Страницы: 38

Бренд: Philips Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды