8
1
Be sure that the power is off on both your computer and the product.
2
Connect the Analog RGB cable to your computer’s display port.
3
Connect the power adapter to the power cable and connect the DC power connector to
the DC power input terminal. Next, plug the power cable into your electrical outlet.
4
Turn on the product’s power switch.
The Power LED lamp will fl ash blue then turn orange.
5
Turn on your computer.
6
While looking at the LCD screen, confi gure the color resolution and size settings.
- Do not modify the refresh rate. Setting the rate to a value that exceeds the DTF-720AB
refresh rate may result in loss of picture.
- The color palette settings and corresponding number of colors displayed are as follows:
High Color (16 bit)
→
65,536 colors / True Color (24 bit)
→
16,777,216 colors
*The number of colors is limited by the effi ciency of your computer and video card. For details,
refer to the user’s manual provided by the manufacturers.
7
Connect the product to the computer using the USB cable. You may notice that the pen
now responds when placed near the screen surface, but will function properly only after
the driver has been installed.
8
Install the DTF-720AB driver (Please refer to “Installing DTF-720AB Driver” on page 10).
Connecting
DTF-720AB
DTF720AB(E).indb 8
09.1.15 0:35:17 PM
