Wacom Cintiq Companion DTH-W1300, Быстрый старт

Страница: 6 / 36

4
EN
Setting up the Cintiq for the first time
1. For full setup make sure you have access to a wifi network.
2. Connect the power cable.
3. Turn on the Cintiq by pressing the power button for 2 seconds.
4. Follow the on-screen instructions to first set up Windows 8.
5. After the Setup is completed, open the Wacom Center application and
update the Cintiq's Wacom driver if a newer version is available.
The Cintiq is shipped with the Wacom pen and touch driver pre-installed.
Wacom recommends to always use up-to-date drivers and software.
AC adapter
Power cable
Make sure the Cintiq is connected to AC power before beginning setup.
Obelix_QSG_WTC.indb 4 8/8/2013 3:02:41 PM