manualshive.com logo in svg

Wacker Neuson WP1540Aw US, Руководство оператора

Поделиться
Скачать
Wacker Neuson WP1540Aw US Скачать руководство пользователя страница 31

WP 1540A/AW

Maintenance

wc_tx000061gb.fm

29

5.8

Cleaning Sediment Cup

See Graphic: wc_gr000029

5.8.1

Turn the fuel valve off. 

5.8.2

Remove the sediment cup

 (a)

 and the O-ring 

(b)

. 

5.8.3

Wash both thoroughly in a nonflammable solvent. Dry and reinstall

them. 

5.8.4

Turn the fuel valve on and check for leaks.

5.9

Adjusting Engine Speed

See Graphic: wc_gr000280

Adjust to a full load speed of 3600 ± 100 rpm.
To adjust engine speed:

5.9.1

Place machine on a rubber test mat to prevent it from moving.

5.9.2

Start engine and allow it to warm up for a minute.

5.9.3

Turn throttle stop screw 

(a)

 in to increase speed, out to decrease

speed. Make sure throttle lever is touching stop screw before

measuring RPM. 

NOTICE

:

 

Running plate at a speed higher than that listed in 

Technical

Data

 can damage both the plate and the engine. 

wc_gr000280

a

Содержание WP1540Aw US







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды