Wacker Neuson WP1540Aw US, Руководство оператора

Страница: 20 / 38

Operation WP 1540A/AW
wc_tx000060gb.fm
18
4.3 To Start
See Graphic: wc_gr000014
4.3.1 Open fuel valve by moving lever to the right (a1) .
Note : If engine is cold, move choke lever to close position (b1) . If
engine is hot, set choke to open position
(b2) K
4.3.2 Turn engine switch to “ON” (e1) .
4.3.3 Open throttle by moving it slightly to left (d1) .
4.3.4 Pull starter rope (c) .
Note : If the oil level in the engine is low, the engine will not start. If this
happens, add oil to engine. Some engines are equipped with an oil
alert light
(f) =
that will come on while pulling the starter rope.
=
4.3.5 Open choke as engine warms (b2) .
4.3.6 Open throttle fully to operate.
4.4 To Stop
See Graphic: wc_gr000014
4.4.1 Reduce engine RPM to idle by moving throttle completely to right (d2) .
4.4.2 Turn engine switch to “OFF” (e2) .
4.4.3 Close fuel valve by moving lever to the left (a2) .