Wacker Neuson WP Series, Руководство оператора

Страница: 27 / 48

9 Maintenance
100_0202_mt_0013.fm
27
1. Remove the cover from the filler neck.
2. Loosen the oil drain hose (VP) for draining the oil and collect the draining oil in a suitable bin.
3. Reattach the oil drain hose (VP).
4. Fill new oil (see chapter Technical Data for the motor oil type and volume) in the filler neck. Use an
appropriate and clean filling container.
5. Check the oil level on the oil-level dipstick and top off if necessary.
6. Close the cover of the filler neck.
Retention/replace the exciter V-belt
1. Fold the control handle to the front.
2. Disassemble the belt guard.
3. Loosen the nuts on the engine V-belt pulley and remove the outer v-belt pulley half.
4. Remove the required number of shims (removing one shim usually suffices).
5. Affix the v-belt pulley half.
6. Attach the removed shims on the outsides of the v-belt pulley half and tighten with the nuts with
25 Nm.
NOTICE
Collect escaping or overflowing oil and dispose of with the waste oil in an environmentally
friendly manner in accordance with the existing rules and regulations of the legislative
body.
Item Designation Item Designation
1 Belt guard 4 V-belt pulley half
2 Nuts 5 V-belt
3 Engine V-belt pulley
NOTICE
Turn the v-belt pulley half here in order to avoid a pinching of the v-belt.
1
3
4
5
2