Wacker Neuson WL 30, Руководство оператора

Страница: 223 / 246

SA FET Y INSTRUC TIONS FOR R E PAIRS
221
W L 30
Articulated frame lock
• Always install the articulating joint lock when performing
repair work in the articulation crush zone.
• Remove the articulated joint lock and store it properly
(Ref. Section 6.2, page 118) after completing the repair
work.
Accumulators:
• Do not attempt to repair accumulators. These are pres-
surized devices requiring special technical skill and tools
to repair. Replace the entire assembly.
Removing components:
• Relieve hydraulic pressure in hydraulic lines and hose
assemblies, cylinders, coolers, the hydraulic reservoir,
pressure reservoirs and other systems or accumulators
before beginning work.
• Replace defective components before using the wheel
loader.
• Clean components carefully before removing them.
• Mark the parts removed in the correct order so that you
do not make mistakes when installing them.
• When removing a component, plug the cleared con-
nections, open holes and housing carefully so that no
dirt can infiltrate.
WARNING
Burn hazard.
Engine components and fluids can get very hot
during operation.
► Do not remove components when the loader is
warm from operation.