Wacker Neuson PT 3A, Руководство оператора

Страница: 33 / 60

PT 2/3 /... Maintenance
wc_tx000013gb.fm
33
3.8 Spark Plug (Wacker Neuson / Honda / Vanguard)
See Graphic: wc_gr000028
Clean or replace the spark plug as needed to ensure proper operation.
Refer to your engine operator’s manual.
The muffler becomes very hot during operation and remains hot for a
while after stopping the engine. Do not touch the muffler while it is hot.
Note: Refer to section “Technical Data” for the recommended spark
plug type and the electrode gap setting .
3.8.1 Remove the spark plug and inspect it.
3.8.2 Replace the spark plug if the insulator is cracked or chipped.
3.8.3 Clean the spark plug electrodes with a wire brush.
3.8.4 Set the electrode gap (a) .
3.8.5 Tighten the spark plug securely.
NOTICE : A loose spark plug can become very hot and may cause
engine damage .
3.9 Sediment Cup (Honda)
See Graphic: wc_gr000029
3.9.1 Turn the fuel valve off.
3.9.2 Remove the sediment cup (a) and the O-ring (b).
3.9.3 Wash both thoroughly in a nonflammable solvent. Dry and reinstall
them.
3.9.4 Turn the fuel valve on and check for leaks.
WARNING
wc_gr000029
b
a