Wacker Neuson PT 3A, Руководство оператора

Страница: 21 / 60

PT 2/3 /... Operation
wc_tx000012gb.fm
21
2.9 To Start (Vanguard)
See Graphic: wc_gr000015
2.9.1 Open fuel valve (a1).
Note: If engine is cold, move choke lever to the “CHOKE” position (b1).
If engine is hot, set choke to the “RUN” position (b2).
2.9.2 Move throttle control to the fast position (c1).
2.9.3 Press stop switch to the on position (d1).
2.9.4 Pull starter rope (e).
Note: The engine is equipped with a low oil protection system. If the oil
level is low, the engine will not start and the stop switch will flicker while
the starter rope is pulled. If this happens, add oil to the engine.
2.9.5 Open choke to “RUN” position as engine warms (b2).
2.9.6 Open the throttle fully (c1) to operate the machine.
2.10 To Stop (Vanguard)
See Graphic: wc_gr000015
2.10.1 Reduce engine RPM by moving throttle completely to the idle position
(c2).
2.10.2 Press engine switch to STOP (d2).
2.10.3 Close fuel valve (a2).
wc_gr000015
a1 a1
a2
c1
b2
c2
d1 d2
e
b1
STOP
STOP