Wacker Neuson PST3 750, Руководство оператора

Страница: 26 / 32

Maintenance PST3/PSTF3 750
26
wc_tx000988gb.fm
3.6 Impeller Reassembly
See Graphic: wc_gr005669
Note: If, upon inspection and testing, a pump component requires
replacement, use only replacement parts available from or approved
by Wacker Neuson.
3.6.1 Turn pump on its side.
3.6.2 Remove sand, dirt, and other debris from rubber parts such as the
impeller
(m) and casing packing (o) before assembling the pump.
3.6.3 Make sure the casing packing fits snugly against the pump base.
3.6.4 Place the shaft sleeve (n) , impeller, plain washer (l), and spring
washer (k) , and stirrer (j) onto the pump shaft.
3.6.5 Tighten the stirrer, being careful not to apply excessive force that might
deform the impeller or cause the rubber liner to flake off.
3.6.6 Pre-test pump to verify proper operation.
wc_gr005669
c
a
e
f
i
h
g
b
o
n
m
l
k
j
d