3 Security
100_0101_si_0007.fm
9
Maintenance
Regular maintenance work is required for a flawless and permanent functioning of the equipment.
Neglected maintenance reduces the equipment's safety.
The prescribed maintenance intervals must be strictly observed.
Do not use the equipment if maintenance or repairs are needed.
Faults
In the event of malfunctions, you must immediately switch the equipment off and secure it.
Immediately rectify faults that can impair safety!
Have damaged or defective components replaced immediately!
You can find more information in the chapter
Troubleshooting
.
Spare parts, accessories
Only use spare parts from Wacker Neuson or such spare parts that are comparable in the design system
and quality of the original parts.
Only use accessories by Wacker Neuson.
Non-observance cancels out any liability.
Disclaimer
For the following violations, Wacker Neuson dismisses any liability for personal injury or material
damage:
Structural change.
Improper use.
Non-observance of this operator's manual.
Improper handling.
Using spare parts that do not originate from Wacker Neuson or are not comparable in the design
system and quality of the original parts.
Using accessories that do not originate from Wacker Neuson.
Operator’s manual
Always keep the operator's manual readily available on the equipment or at the place of application of
the equipment.
If you should lose the operator's manual or require another copy, please contact your Wacker Neuson
contact partner or download the operator's manual from the Internet (
www.wackerneuson.com
).
Hand over this operator's manual to every other operator or subsequent owner of the equipment.
Country-specific regulations
Also observe country-specific regulations, standards and guidelines for accident prevention and
environmental protection, such as dealing with hazardous substances and wearing personal protection
equipment.
Supplement the operator's manual with additional instructions on taking operational, regulatory, national
or generally applicable safety guidelines into consideration.
Operating elements
Always keep the equipment's operator's controls dry, clean and free from oil and grease.
Operator's controls, such as the ON/OFF switch, throttle control handles, etc. may not be locked,
manipulated or changed without permission.
Check for damage
Check the shutdown equipment at least once per shift for externally visible damage and deficiencies.
Do not operate the equipment if damage or deficiencies are discernible.
Have damage and deficiencies rectified immediately.
