3 Security
100_0101_si_0007.fm
11
3.4
Transport
Switch off the unit
Before transport, switch the equipment off and remove the plug from the plug receptacle. Allow the
engine to cool down.
Transporting the equipment
Secure the equipment on the means of transport from tipping over, falling down or sliding.
Recommissioning
Before recommissioning, attach and fasten equipment, equipment parts, accessories or tools that were
dismantled for transport purposes.
Proceed only according to the operator's manual.
3.5
Operating safety
Explosive area
Never operate the unit in explosive environments.
Work environment
Familiarize yourself with the work environment before beginning work. For example, this includes the
following points:
Obstacles in the work and traffic area.
Load-bearing capacity of the soil.
Necessary protection of the construction site, especially for the public transport area.
Necessary protection of walls and ceilings.
Options available in the event of accidents.
Safety in the working area
If you work with the equipment, pay particular attention to the following points:
Pay maximum attention near drops or slopes. Risk of crashing.
No people may be in the working area.
Checks before starting work with the HMS
Check the following points before starting work:
Connection values of the drive motor.
Condition of the individual components.
Permissible combinations and connection links of the HMS.
Commissioning the HMS
Observe the safety instructions and warning notices on the drive motor as well as those in the operator's
manual.
Never operate equipment that is in need of maintenance or repairs.
Operate the HMS according to the operator's manual from the drive motor.
Stability
Always ensure good footing when working with the HMS. This especially applies when working on
scaffolding, ladders, uneven or slippery surfaces.
Beware of hot parts
Do not touch the hot vibrator head (component of HMS) during operation or shortly thereafter. The
vibratory head can become very hot and cause burns.
Use caution with moving parts of the HMS
Keep hands, feet and loose clothing away from moving or rotating vibrator head (component of HMS).
Do not use components of the HMS as a climbing aid or securing means
Never use the protection hose, power cable or other components of the HMS as a climbing aid or
securing means.
