Wacker Neuson LTN 6K-V, Руководство оператора

Страница: 12 / 106

wc_si000704gb.fm
12
Safety Information LTN
„
Do not operate the machine if any safety devices or guards are missing or
inoperative.
„
Do not modify or defeat the safety devices.
„
Only use accessories or attachments that are approved by Wacker Neuson.
Safe
operating
practices When operating this machine:
„
Remain aware of the machine’s moving parts. Keep hands, feet, and loose
clothing away from the machine’s moving parts.
When operating this machine:
„
Do not operate a machine in need of repair.
Personal
Protective
Equipment
(PPE) Wear the following Personal Protective Equipment (PPE) while operating this
machine:
„
Close-fitting work clothes that do not hinder movement
„
Safety glasses with side shields
„
Hearing protection
„
Safety-toed footwear
Before
Starting
„
Be sure the machine is on a firm, level surface and will not tip, roll, slide, or fall
while operating.
„
Never connect machine to other power sources, such as supply mains of power
companies.
„
Never use the machine if the insulation on the electrical cord is cut or worn
through.
„
Never raise the tower or operate the machine in high winds.
„
The tower extends up to 8.7 m (28.54 ft.). Make sure the area above the trailer
is open and clear of overhead wires and obstructions.
Operation
„
Keep the area under and around the lights clear of people while raising and
lowering the tower.
„
Do not move the Light Tower while it is operating.
After Use
„
Stop the engine when the machine is not being operated.
„
Close the fuel valve on engines equipped with one when machine is not being
operated.
„
Ensure that the machine will not tip over, roll, slide, or fall when not being
operated.
„
Store the machine properly when it is not being used. The machine should be
stored in a clean, dry location out of the reach of children.
„
Lower the tower when not in use, or if high winds or electrical storms are
expected in the area.
„
The lamps become extremely hot in use! Allow the lamp and fixture to cool
10–15 minutes before handling.
„
Lamp Safety