Wacker Neuson GP 5600A, Руководство оператора

Страница: 8 / 62

Safety Information GP/GPS 5600A
8
wc_si000237gb.fm
1.2 Machine Description and Intended Use
This machine is a portable electric power source. The Wacker
Neuson Portable Generator consists of a tubular steel frame
surrounding a fuel tank, a gasoline engine, a control panel, and an
electric alternator. The control panel includes controls and
receptacles. As the engine runs, the generator converts mechanical
energy into electric power. The operator connects loads to the electric
power receptacles.
This machine is intended for the purpose of supplying electrical power
to connected loads. Refer to the product specifications for the output
voltage and frequency of this generator, and the maximum output
power limit of this generator.
This machine has been designed and built strictly for the intended use
described above. Using the machine for any other purpose could
permanently damage the machine or seriously injure the operator or
other persons in the area. Machine damage caused by misuse is not
covered under warranty.
The following are some examples of misuse:
Connecting a load that has voltage and frequency requirements that
are incompatible with the generator output
Overloading the generator with a load that draws excessive power
during either continuous running or start-up
Operating the generator in a manner that is inconsistent with all
federal, state and local codes and regulations
Using the machine as a ladder, support, or work surface
Using the machine to carry or transport passengers or equipment
Operating the machine outside of factory specifications
Operating the machine in a manner inconsistent with all warnings
found on the machine and in the Operator’s Manual
This machine has been designed and built in accordance with the
latest global safety standards. It has been carefully engineered to
eliminate hazards as far as practicable and to increase operator
safety through protective guards and labeling. However, some risks
may remain even after protective measures have been taken. They
are called residual risks. On this machine, they may include exposure
to:
Heat, noise, exhaust, and carbon monoxide from the engine
Fire hazards from improper refueling techniques
Fuel and its fumes
Electric shock and arc flash