Wacker Neuson GP 3800A Скачать руководство пользователя страница 37

Страница: 37 / 130

GP Repair

Operation

wc_tx000545gb.fm

3.11 Ground Fault Interrupt (GFI)

See Graphic: wc_gr002498

The two receptacles

(f)

are protected by a ground fault circuit interrupt

(GFI). The GFI shuts off the power to the receptacle when a ground

fault occurs in the generator or to a piece of equipment attached to the

generator.
The GFI should be tested for proper operation every time the generator

is used.
To test the GFI:
Start the generator. Turn the auto idle “OFF”. Push the TEST button

(h)

on the receptacle in. The RESET button

(g)

will pop out. The power

is now off at the receptacles. If the RESET button does not pop out, the

GFI is not working. Do not run the generator until the problem can be

corrected. To restore power to the receptacles, push the RESET

button in.
If the RESET button pops out during operation, stop the generator and

check the generator and equipment for defects.

3.12 Twist-Lock Receptacles

See Graphic: wc_gr002498

Twist-lock receptacles

(c, j)

are used at the 120V 30A and 120/240V

30A outlets. These receptacles are not protected by the GFI.
To attach a power cord to a twist-lock receptacle, insert the plug into

the receptacle and turn it clockwise to lock it in place.

Содержание GP 3800A



































































































































Результаты поиска

Содержание GP 3800A

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson GP 3800A, Руководство по ремонту

Результаты поиска

Содержание GP 3800A

Отзывы:

Бренды по названию

Популярные бренды