Wacker Neuson GP 3800A страница 10 Скачать руководство пользователя

Страница: 10 / 130

Safety Information

GP Repair

wc_si000169gb.fm

1.1.12 ALWAYS store the equipment properly when it is not being used.

Equipment should be stored in a clean, dry location out of the reach of

children.

1.1.13 ALWAYS position and operate the generator on a firm,

noncombustible, level surface.

1.1.14 ALWAYS transport the generator in an upright position.
1.1.15 ALWAYS keep the machine at least one meter (three feet) away from

structures, buildings, and other equipment during use.

1.1.16 ALWAYS keep the area immediately surrounding and underneath the

machine clean, neat, and free of debris and combustible materials.

Make sure that the area overhead is clear of debris that could fall onto

or into the machine or exhaust compartment.

1.1.17 ALWAYS remove all tools, cords, and other loose items from the

generator before starting it.

1.1.18 ALWAYS make certain the machine is well-grounded and securely

fastened to a good earthen ground per national and local regulations.

Содержание GP 3800A



































































































































Результаты поиска

Содержание GP 3800A

Отзывы:

Похожие инструкции для GP 3800A

Бренды по названию

Популярные бренды

Wacker Neuson GP 3800A, Руководство по ремонту

Результаты поиска

Содержание GP 3800A

Отзывы:

Похожие инструкции для GP 3800A

Бренды по названию

Популярные бренды