Wacker Neuson ET09-02 Скачать руководство пользователя страница 132

Страница: 132 / 248

5-30

BA ET16 de* 1.0 * et16b510.fm

5 Operation

Hydraulic Easy Lock quickhitch (option)

• Attend specific training before putting into operation. Training must be

given by authorized technical personnel and must be understood by
the operator.

• For safety reasons, the quickhitch must be operated with two control

elements. This avoids opening the quickhitch unintentionally during
work operation.

• The quick coupler system and the attachment support must be

undamaged and clean.

• For more information, see

Easy Lock/Powertilt with Easy Lock

Operator’s Manual.

• Store the

Easy Lock/Powertilt with Easy Lock

operator's manual

together with the vehicle's operator's manual.

WARNING

Crushing hazard when picking up attachments!

If an attachment is not locked correctly, it can come off and
cause serious injury or death.

►

Do not allow anyone to stay in the danger zone.

►

Only use undamaged attachments and quick coupler systems
.

►

Check pin

must be fully retracted. Otherwise repeat the lock

cycle until check pin

is retracted.

►

Before starting any work and after every locking process,
press the attachment to the ground and quickly move it back
and forth over just over the ground a few times to check the
secure locking.

►

Operate the machine only with a safely locked attachment.

WARNING

Danger of crushing when attachments are removed!

If an attachment is not locked correctly, it can tip over and cause
serious injury or death.

►

Do not allow anyone to stay in the danger zone.

►

Lower the attachment to level and firm ground ensuring
stability.

Содержание ET09-02

























































































































































































































































Результаты поиска

Содержание ET09-02

Отзывы:

Похожие инструкции для ET09-02

Бренды по названию

Популярные бренды

Wacker Neuson ET09-02, Руководство оператора

Результаты поиска

Содержание ET09-02

Отзывы:

Похожие инструкции для ET09-02

Бренды по названию

Популярные бренды