Wacker Neuson DPU80 Series, Руководство оператора

Страница: 13 / 74

3 Security
100_0202_si_0008.fm
13
This machine has the following safety equipment:
Protective frame / protective hoods
The protective frame with the protective hoods protects the operator in particular from hot engine parts
and noise.
Emergency stop switch
The emergency stop switch is used solely to switch off the machine in the case of danger. Activating the
emergency stop switch results in the machine immediately switching off. Operation can only be resumed
after unlocking the emergency stop switch.
Automatic central position of control handle
If the control handle is released in full load, it automatically returns to the central position and the
machine enters stand vibration.
3.14.1 Safety shutdown – Remote-controlled machinery
The machine is operated via an infra-red remote control. For safety reasons, it switches off
vibration and movement in the following situations:

When the operator enters the proximity area (approx. 1–2 meters from a receiving unit).

When the operator leaves the receiving area (a maximum of 20 meters from the machine).

Interruption of the clear line of sight between the remote control and receiving units of the machine.

Power failure of remote control and/or machine.
3.15 Behavior in dangerous situations
Preventive measures:

Always be prepared for accidents.

Keep first aid equipment on hand.

Make sure that all employees are familiar with accident reporting, first aid, and rescue facilities.

Keep access routes clear for emergency vehicles.

Make sure that employees receive first aid training.
Measures in the case of an emergency:

Immediately take the machine out of operation.

Remove injured and other people from the danger zone.

Initiate first aid measures.

Alert rescuers.

Keep access routes clear for emergency vehicles.

Inform the person responsible at the site of application.
Item Description Item Description
1 Protective frame / protective hoods 3 Emergency stop switch
2 Automatic central position of control handle
NOTICE
Always tighten loosened screwed connections with the prescribed torque setting.
1
3
2
1
3