manualshive.com logo in svg

Wacker Neuson DPU Series, Руководство оператора

Поделиться
Скачать
Wacker Neuson DPU Series Скачать руководство пользователя страница 37

8 Operation and use

37

100_0202_op_0011.fm

2. Press the start button – the engine switches off.

8.5.2

Decommissioning the machine (remote control)

Switch off remote control and engine

1. Release both joysticks of the remote control.
2. Directly aim remote control towards a receiver unit.

3. Press the ON/OFF switch of the remote control to turn off the engine and remote control – the 

operation control lamp switches off when the remote control is switched off.

8.5.3

Deactivate machine

NOTE

Compatec - compaction display automatically switches itself off once the machine is 
turned off.

Item

Designation

Item

Designation

1

Control lamp for operation

2

ON/OFF switch

NOTE

If the remote control is not directly aimed at the receiving unit, only the remote control will 
be switched off.

NOTE

The remote control will automatically switch itself off after approx. 10 min.

WARNING

Operation of the machine by unauthorized persons can lead to serious injury.

Ensure that no unauthorized persons have access to the machine and remote control.

Always keep the remote control in a safe place, e.g. within the locked machine.

1

2

Содержание DPU Series









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды