Wacker Neuson CRT 48 Скачать руководство пользователя страница 24

Страница: 24 / 76

wc_tx001540gb.fm

Lifting and Transporting

CRT 48

Lifting and Transporting

To lift the trowel with a fork lift:

Fork lift pockets

(a)

are provided on both the front and back of the machine.

Carefully insert the lifting forks into each fork lift pocket.

To hoist the trowel:

Attach a sling or chains through the lifting bars

(b)

on each side of the seat

pedestal.

NOTICE:

Make sure the lifting device has enough weight-bearing capacity to lift

machine safely. Refer to Section

Technical Data.

CAUTION

Possibility of injury or equipment damage. Unlocked steering handles can swing

forward unexpectedly.

Engage manual steering handle lock before lifting.

WARNING
DO NOT

lift the trowel by the guard rings or any part of the trowel other than the

lifting fixture, as the component may fail, causing the trowel to fall, possibly injuring

bystanders.

wc_gr003774

Содержание CRT 48













































































Результаты поиска

Содержание CRT 48

Отзывы:

Похожие инструкции для CRT 48

Бренды по названию

Популярные бренды

Wacker Neuson CRT 48, Руководство оператора

Результаты поиска

Содержание CRT 48

Отзывы:

Похожие инструкции для CRT 48

Бренды по названию

Популярные бренды