manualshive.com logo in svg

Wacker Neuson BS 50-2, Руководство оператора

Поделиться
Скачать
Wacker Neuson BS 50-2 Скачать руководство пользователя страница 30

 wc_tx003551gb_FM10.fm

30

Rammer

Lifting and Transporting

3

Lifting and Transporting

3.1

Lifting the Rammer

Requirements

■

Lifting device (crane or hoist) capable of supporting the rammer’s weight  (see 
the identification plate on the rammer)

■

Lifting gear (hooks, slings, and/or chains) capable of supporting the rammer’s 
weight

■

Engine stopped and cool to the touch

Procedure

Perform the procedure below to lift the rammer.

1. Attach the lifting gear to the central lifting cable 

(a)

.

2. Lift the rammer a short distance, making sure that all connections are secure.

3. Continue lifting the rammer as required.

       

a

e

wc_gr010405

WARNING

Crushing hazard. Do not use the guide handle 

(e) 

to lift the rammer. 

►

Use only the central lifting cable to lift the rammer.

WARNING

Crushing hazard. Do not use the central lifting cable if there are any signs of cut 
wires, excessive wear, or other defects.

►

Always inspect the central lifting cable for wear, damage, or abuse. Replace a 
damaged lifting cable immediately.

►

Protect the central lifting cable from all sharp edges.

Содержание BS 50-2











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды