1
Revision 03/05/07
BFS SERIES
Technical Data
. Saw Features
The Wacker BFS Series Concrete Saw is designed for wet or dry,
general application sawing. The heavy duty steel, one piece box
frame is precision jig welded and reinforced. This precisely reinforced
steel construction with balanced weight distribution and ergonomic
handlebars assures straight and accurate cutting as well as ease
of operations preventing fatigue. The 4-cycle air cooled engine is
located for easy access and maintenance. Each solid rubber wheel
is mounted on an axle for years of reliable use. The rear axle is rigid,
while the front axle pivots causing the blade to be lowered to the
desired cutting depth. The positive screw feed provides precision
control of the raising and lowering of the blade. The positive screw
feed control wheel and all controls are located for easy access and
visibility. The following table shows the available models and the
features that differentiate them.
The Wacker BFS-1318AS features a Honda ™ GX390 13 hp engine.
The Wacker BFS-2020AS features a Honda™ GX620 20 hp engine
with electric start and key ignition switch.
.1 Blade Drive System
The blade drive shaft pulleys are connected to both the engine and
to the frame mounted blade shaft. Matched v-belts are connected
to the pulleys providing engine power to the blade shaft. The 1 inch
diameter blade shaft is supported by two self-aligning pillow block
bearings. The uniquely designed right and left blade shaft allows for
cutting within 2 inches of any wall.
. Depth Indicator
The BFS Series models include a depth feed indicator mounted
on the console, for ease of use and visibility.
Model
Engine/Blade Capacity Additional Features
BFS-1318AS
Honda GX390 13 HP
18
blade guard
cyclone air filter, tach/hourmeter
BFS-2020AS
Honda GX620 20HP
20
blade guard
electric starter, tach/hourmeter, centrifugal
water pump (optional)
