background image

1-16

OM 75Z3/8003 US – Edition 4.0 * * 7003b110.fm

Introduction

Description

This label shows the control mode selected on the ISO/SAE valve.

– see chapter 3.50

 Changeover valve for control pattern ’’B’’ (option)

 on page 3-79

Location

Inside the cab.

Description

Read the Operator’s Manual before working with the machine.

Location

Inside the cab on the right-hand trim.

Description

Pinch point hazard.
1

Always use the handles to open and close the front window. 

2

Always lock the front window with both locks.

3

Ensure that no-one hits the window with their head as you open and close it.

Location

On the front window.

Description

Press the boom and the stabilizer blade into the ground as you leave the machine, remove 
the starting key and place chocks on the left and right under the tracks 

– see 

Parking 

checklist

 on page 3-19.

Location

Cab roof lining.

Description

This label describes the pedal and control lever functions.

– see 

Control levers/control pattern ’’A’’: Overview

 on page 3-75

Location

Cab roof lining.

Description

Describes the throttle lever function.

– see 

Throttle

 on page 3-20

Location

Below the throttle lever.

Description

Describes the stabilizer blade lever function.

Location

Inside the cab.

Fig. 21: Changeover valve for SAE/ISO controls

Fig. 22: Read the Operator’s Manual

Fig. 23: Danger of being caught up

Fig. 24: Parking the machine correctly

Fig. 25: Controls

Fig. 26: Describes the throttle lever function

Fig. 27: Stabiliser blade lever function

Содержание 75Z3






























Отзывы: