manualshive.com logo in svg

Wacker Neuson 0008060, Руководство оператора

Поделиться
Скачать
Wacker Neuson 0008060 Скачать руководство пользователя страница 34

Maintenance

WP 1540A/AW

wpm_tx001130gb.fm

32

5.12 Troubleshooting

  

Problem / Symptom

Reason / Remedy

Plate does not develop full 

speed. Poor compaction.

•  Engine throttle control not completely open.
•  Throttle control not adjusted correctly.
• Ground too wet, plate sticking. Allow soil to dry 

before compacting.

• Drive belt loose or worn, slipping on pulleys.  Adjust 

or replace belt. Check that engine mounting bolts 
are tight.

• Exciter bearings binding. Check condition and level 

of oil in exciter. Add or change oil.

• Air filter clogged with dust, reducing engine perfor-

mance. Clean or replace air filter.

• Engine speed too low. Check engine speed with 

tachometer. Adjust or repair engine to run at correct 
speed. Refer to engine manual.

Engine running, no vibration

• Engine throttle not open.
• Drive belt loose or broken. Adjust or replace.
• Clutch damaged. Inspect and replace clutch.
• Engine speed too low. Check engine speed.
• Too much oil in exciter. Adjust oil to correct level.

Plate jumps or compacts 

unevenly.

• Ground surface too hard. 
• Shockmounts loose or damaged.

Содержание 0008060











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды