WACKER Group CT 30 Series, Руководство по ремонту

Страница: 18 / 44

2-8
2 GUIDE HANDLE TROWEL REPAIR
WARNING
1001RM04
d
k
f
e
j
g
a
b
c
m
h
s r
q
p
o
n
n
1013SD53
2.6
Pro-Shift ®
Pitch Control Cable Replacement
Due to tension in torsional spring, the
Pro-Shift ®
handle may snap back abruptly and strike
personnel working in the vicinity.
Disassembly:
1. Push Pro-Shift ® handle
(a)
all the way forward. Re-
move two M6 screws
(d)
and cover
(e)
from Pro-
Shift ®
assembly.
2. Remove two retaining nuts
(s)
from the pitch control
cable
(q)
.
3. Disengage cable from fork
(r)
and slide through
pulley
(p)
.
4. Pull the Pro-Shift
®
handle all the way back.
5. Remove two M8 screws
(n)
holding handle to handle
base
(o)
. Carefully pull handle and cable control away
from handle base.
6. Remove M6 screw
(k)
from handle. Pull Pro-Shift ®
assembly and pitch control cable from handle.
7. Remove threaded rod
(h)
from housing
(j)
.
Note: On some models the threaded rod may be
replaced by a bolt.
8. Remove M8 screws
(g)
. Pry out torsional spring
(m)
and mandrel
(f)
.
9. Using pliers, squeeze handle legs
(a)
together and
remove handle.
10. Slide dowel pin (b) to one side.
Note: On some models, the dowel pin may have a
retaining washer
(c)
.
11. Slide control cable off of dowel pin.