Wachs Trav-L-Cutter HE, Руководство пользователя

Страница: 7 / 68

Chapter 1, Introduction to the Equipment: Manual Updates and Revision Tracking
E.H. Wachs Part No. 02-MAN-01, Rev. A 3
M
anual
u
PdaTes and
r
evision
T
racking
Occasionally, we will update manuals with improved opera tion or maintenance procedures, or
with corrections if nec essary. When a manual is revised, we will update the revision history on the
title page.
Current versions of E.H. Wachs Company manuals are also available in PDF for mat. You can
request an electronic copy of this manual by emailing customer service at sales@ehwachs.com.
You may have factory service or upgrades performed on the equipment. If this service changes any
technical data or operation and maintenance procedures, we will include a revised manual when
we return the equipment to you.
e
quiPMenT
d
escriPTion
compact Design, Easy Set-up
Lightweight, low profile design needs only 10” to 12” of clearance and set up time is ten minutes or
less. Once the adjustable drive chain is pinned together and tensioned around the pipe the machine
is ready to operate.
Standard Weld Prep capability
Weld preparation detail can be achieved from common 30º and 37-1/2º bevel on standard wall
carbon steel.
Grooved, Mechanical Joint Preparation
The Trav-L-Cutter can simultaneously cut off and groove pipe in one cut. Cutters are available for
Victaulic and other grooved coupling systems.
offshore or Pipe line Maintenance
The Wachs Hydraulic Trav-L-Cutter offers the inherent advantages of a completely sealed and
self-lubricating closed loop system. The Model HE is particularly suited to field machining opera -
tions under the type of hostile conditions often found in pipe line maintenance and construction
such as dirt, sand and water. It is a portable pipe cutting machine that can be used conveniently on
offshore drilling rigs, pipe lines and on construction work in rivers and harbors.