Wachs Trav-L-Cutter HE, Руководство пользователя

Страница: 14 / 68

Trav-L-Cutter
10 Part No. 02-MAN-01, Rev. A E.H. Wachs
Feed:
Pneumatic: 3/4 H.P. Air Motor coupled through overload clutch, gearbox and chain reduction to
final machine drive sprocket. Hydraulic: 4 H.P. Hydraulic Motor.
Feed Method:
Positive, non-slip chain drive
Air Requirements:
100 cfm @ 90 psi (2,832 l/min @ 6.3 bar)
Hydraulic Requirements:
15 gpm @ 1500 psi. (57 l/min @ 106 bar)
Clearance:
10” to 12” (254 to 305 mm) radial, depending on pipe diameter. 20” axial (508 mm)
Weight:
Operating - 215 lbs. (97.7 kgs)
Shipping-(typical) - 418 lbs. (190 kg)
Dimensions:
Length: 24” (61 cm)
Width: 20” (51 cm)
Height: 10-3/4” (28 cm)
Controls:
(Pneumatic and Hydraulic):
Cutter on-off, feed on-off, with interlock to prevent machine feed unless cutter is turning. Adjust-
able Feed Speed Control (Hydraulic Only) Flow Control Valves. Separate controls provide adjust-
able feed and cutter speed. Forward/Reverse Valve. Permits machine to be backed up.
Shipping and Storage Case:
41” x 25” x 18” (104 x 63.5 x 45.7 cm)
10.7 cu. ft. (0.53 m
2
)
Finish:
Paint
Hose Assemblies (Hydraulic):
5/8” hose sets with quick couplers, in 45’ lengths
Hydraulic Power Sources (Model HE):
- Electric, Gasoline or Diesel Engine driven.
Gang of Cutters for Beveling Pipe
1 R.H. Bevel, 1 Slitting Saw, and 1 L.H. Bevel