Wachs Trav-L-Cutter E, Руководство пользователя

Страница: 31 / 68

Chapter 6, Consumable Select Chart
E.H. Wachs Part No. 02-MAN-01, Rev. A 27
Chapter 6
Consumable Select Chart
d
aTa on
c
uTTer
s
ize
Use a 6” diameter cutter for up to 1” wall.
Use a 7” diameter cutter for up to 1-1/2” wall.
Use a carbide tipped cutter for cutting cement lined or cast iron pipe. Heavy wall cast iron pipe
may require the use of the next larger size cutter. If the wall thickness of the pipe is unknown, feed
the cutter into the pipe as far as possible and then retract it so that the cut can be inspected to
determine if a larger cutter is needed.
The gang of cutters for beveling pipe is designed for use on steel pipe up to 5/8” wall for making a
weld preparation. The standard bevel is 37.5º.
SPECIAL APPLICATION BLADES CAN BE PRODUCED ON SPECIAL ORDER.
PLEASE CONTACT YOUR WACHS REPRESENTATIVE FOR FURTHER DETAILS.